[Q] LG F180K baseband L / K? topic

Hey guys,
i ve got a bit not comfortable situation. I have LG F180K. For the last 4 months I was using L baseband on K variant LG.
Why? I can flash K baseband, BUT It will not work. No signal. When i flashed L baseband, it was strangely working o.O ... L baseband on K variant. Its kinda strange right? But its true.
I tried flashin K baseband. It doesnt work. But I need it, i need LTE which on L baseband I cannot get.
Please guys, if someone has any idea, post it here. DEVS are so welcome.., maybe with their help we can do it.
Thanks!

usion v5.1 - LP5.0.2_r1 (baseband and bootloader ANG2) topic

Hello everyone

i have G900F which was running stock rooted ANG2 4.4.2 rom.
i installed CWM recovery then Fusion V2 Kernel and Fusion last rom and PA gapps

my problem is:
i cant open the mobile data (phone call and sms are fine)
there is an explanation marks on the signal and wifi icons

in the about device it show that my baseband and bootloader are ANG2 (which is 4.4.2) while i am runinng 5.0.2 CFW.

what should i do??

Thanks

[Q] Invalid IMEI/ unknown baseband/ Cant connect to wifi please help topic

guys i need your help to fix back my Kata T-mini 4.4.2 [MTK6582]. i just did a flash recovery using the recovery tool app. after the flash it reboot automatically but then no signal shown when i check it using the MTK Tool showing "null IMEI andi unknown baseband". when i open the wifi cant connect to any network. hoping someone cud help me here. i tried already all the methods on how to recovery the imei but still not working. and my phablet cant be read in SP Flash tools.

Attached Thumbnails

 

[Q] 4.4.4 baseband drivers? topic

Anyone have these or know where to get them? I've looked around to no avail. Since CM didn't upgrade them we all have to do it ourselves... I'd rather not have to go through the agony of going back to stock and probably not doing it right, so figured I'd try flashing the drivers. Real tired of my GPS not working at all, and all the other radios just barely hanging on.

Your help is appreciated!

IMEI and BaseBand Version Fix Works 100 % topic

Lately i've been watching people as well as myself screwing imei and not getting reception.
There are two cases possible
1> You screw only the IMEI
2>You screw the baseband version also ( which in some cases makes the mobile lag )

Lets start with fixing the baseband version nothing can be done with a simpler way you just have to flash the stock firmware again and the next time you boot the baseband version will appear.

Imei Fixing

Prerequisite
** Make sure you are using Stock rom and Locked Bootloader
1> Install PDA Net and CDC Drivers*
2> Install MauiMeta 3G Software*
3> Download MTK 6582 NVRAM Database* (The Chipset our phone is using )

After you are done doing all these things
1) Open MauiMeta App
2) Click on Action select open NVRAM DB, A popup will appear navigate to the database files downloaded and select the db files and select the files starting with APDB... and the next time BPLG...
3) Click on Option on App and select "Connect Smart Phone In Meta Mode "
4) Select USB COM as your host and click on Reconnect
5)After doing this switch off your phone and connect it if drivers are installed properly the phone will boot in meta mode and the window besides the USBCOM will be accessible click on IMEI Tool if NVRAM DB files are asked provide it
6) Write the IMEI from the Mobile Phones Box (Behind) in both the tabs and press Upload to flash
7) Restart Phone
Voilà IMEI Appears and you can now get Network Signal

AS THIS IS MY FIRST POST AND I HAVEN'T COMPLETED POSTING 10 TIMES IN OTHER THREADS I AM NOT ALLOWED TO SHARE LINKS FROM OTHER WEBSITE WHICH INCLUDE THE SOFTWARE DRIVERS AND NVRAM DATABASE FILE. YOU TOO CAN BE INTELLIGENT AND GOOGLE THEM.

PRESS THANKS IF HELPED!!

Change the Baseband (Modem), possible? topic

Hi,

after Update to 127 my L09 has problems to switch to 4G automatically, also the 130
With 120 all was fine.
So is it possible, only to flash the modem from 120 to 127?
In the update.APP i saw the modem.img but here where also some other *.img files with the words "modem".

So it would be enough, only to change the modem.img in the update.app and flash it back?

Unknown Baseband topic

Hi, i gave my N3 to my dad and i installed stock firmware via Odin N9005XXUENB7_N9005OXAENB1_N9005XXUENB1_HOME.tar.

I have issues like : the phone is lagging, freeze on lockscreen, unknow baseband, no signal, no sound, unknown Imei and Imei SV

Somebody help me please ?

[Q] Imei NULL/NULL unkown Baseband topic

It happened yesterday after
1st of all ther is no EFS Backup;
any possibility to fix this ?

[Q] Baseband version unknown topic

I rooted my phone for the first time and everything went fine. I backed up apps and setting using Titanium Backup. I did a full backup from CWM Recovery. I then did a factory reset and then restore from CWM Recovery. It booted up but I get constant "Process ..... has stopped" messages and I can't really do anything so I did another factory reset and went through the basic setup and everything seems fine except I now I have no cell network connectivity. The Baseband version says unknown. I have 4.4.2. Build KOT49H.I747UCUFNJ1, bootloader i747UCUFNJ1. IMEI says unknown. I tried to flash the NJ1 bootloader/modem from enewman17 but no change. What else can I try? Thanks

[GUIDE]How to flash modems (baseband) and bootloader with Odin on the GT-I9505 topic

Hi everyone, this is my little Guide how to flash a modem (baseband) or a bootloader, or both together in Odin. Reading many threads in the last weeks, has showed me there are many people who have problems with flashing via Odin. I hope this thread will help and result in a successful flash for you guys and girls.
First of all, i want to say, i'm using Odin 3.09 for flashing.
You can get it from here:
http://odindownload.com/

I explain how to flash a modem and a bootloader together at the same time. You can follow the steps also for only one of both.
Everything you are doing with your phone is on your own risk. I am not responsible for anything.
So let's start with the flash:
You have downloaded your modem (let's say NB9....tar.md5) and your bootloader? OK, so
1. rightclick on Odin and start it as administrator.
2. Now open the windows taskmaster. End all "Kies" processes.
3. In Odin untick "Auto reboot"
4. For the bootloader select BL and browse to your bootloader file.
5. For the modem select CP and browse to your modem file.
The next step is VERY IMPORTANT
6. Power off your phone
7. Start your phone into download mode by holding Vol down, and power button.
IMPORTANT: DON'T REBOOT INTO DOWNLOAD MODE FROM YOUR POWER MENU! ALWAYS USE THE THREE BUTTON COMBO!
8. Once your phone is in download mode, connect it to your PC. (Best results always with your original Samsung USB cable)

Odin should say "Added" now.
9. Press the Start button in Odin and let it do it's magic.
wait about 2 - 5 minutes.
10. When Odin shows "PASS" you can unplug your phone.
IMPORTANT: WAIT UNTIL YOU SEE "PASS" DO NOT UNPLUG THE PHONE BEFORE!
11. When you have unplugged your phone, it is still in download mode. Just hold the power button about 8 seconds until your phone reboots.
DONE
Go to Settings/my device/about phone. There you will see your new baseband.
To check if the bootloader was flashed correct you need a terminal emulator.
type: su (press enter)
Type: getprop ro.bootloader (press enter)
The result shows wich bootloader you have.

Thanks
@friedrich420 @roy72
@Acer4605
@Darkwing_X @sanoc69
@4aces @yukichan @jds3118 @stoerte

[Q] 850 Mhz Baseband topic

1) Which baseband is needed to support 850 Mhz?
2) What is the command for heimdall to flash a different modem?

What is currently running does not support 3G data in Peru nor the GPS radio.

--- RADIO DATA ---
RIL: I9000XXJVT - b952b2cca19ab65872f9196d42ae64a1
Baseband: I9000XXJVK

--- SOFTWARE INFO ---
Brand: samsung
Model: GT-I9000
Device: GT-I9000, GT-I9000, aries [GT-I9000]
Version: 11-20140820-NIGHTLY-galaxysmtd (f85fdb2bbf)
Release: 4.4.4
Root: true (granted)
Busybox: true (v1.22.1)

Lost Baseband and IMEI after Water Damage topic

Hi all..

Ive been reading a lot in the forum for the last few days but cant find a solution for my problem..

My brother threw his phone into the toilet..Has been in there for about 3 seconds, as he told me...
He tried the "rice trick" and tried to turn it on after 24h (although i told him not to so early)..

After a week of drying and a failed warranty claim he gave it to me..
Everything was working fine besides:

- the speaker which would have no output sporadically
- the battery which would drain very fast
- the phone did not recognize a sim card beeing put in

I decided to take the phone apart and clean it with Isopropyl alcohol (99,9%) to stop the corrosion process and remove all residue from the water, which might have bridged or damaged some contacts..

After opening i saw which parts the water got to...
I had residue on the SIM slot, the SD Card slot and some lighter corrosion signs around that area..
So my first thought was "Great..Should work after cleaning"....

When i turned it on after cleaning and drying the speaker problem was gone...
But still no reaction to a SIM beeing put in...
Thats when i realized that baseband and IMEI are completely gone..
Baseband unknown, IMEI blank..
So..I started on B520..

What i tried to get it back so far is:

Factory Resets (Hard+Soft),
No changes..

Reflash B520 with dload SD Card method (wiped before)..
No changes..

Eroot + 5irom Backup
5irom tries to backup but all i got at first was an empty folder..
After a bit of tying this and that i got 2 files.. 5.img (8MB) and 10.img (18MB)..
5irom cant restore anything from this files..All zeros in HEX-Editor..Both files..

Downgrade to B125 via dload SD Card method..
No changes..

Downgrade to B112 via dload SD card method..
No changes..

Thats where im currently at..Im pretty sure i cleaned all residue from the logic board...
Did a second clean in between to make sure..
So i guess, its either hardware failure (the modem/radio part of P6 is right behind the SIM/SD slots, where the water left most residue..) or some kind of software chaos that i cant fix on my own..

Any ideas what else i could try to restore my baseband and imei?
Never been flashed with custom firmware...Just used the root to get 5irom working..

Thx in advance..
SlGGl

[Q] Baseband problems on Z3C topic

Hi there,

I have some serious baseband problems. Don't know if it's bootloader unlock related, because this was the first thing I did with my telephone.

I tried to relock my bootloader, but the problems don't go away. My phone originally ran on a Greece unbranded firmware. My network operator is Vodafone NL. I run version 23.0.1. A.5.77.

Once my connection is unstable, my Z3C sometimes 'forgets' the baseband settings and sets the network type to 'unknown'. I lose mobile data. However, I can still make calls. I can change it back to USA Baseband (I live in Europe) with *#*#4636#*#* --> Information --> select baseband --> 'USA Band'. After that I'm unable to make calls, but mobile data works fine again.

Have to remark that I unlocked my phone BEFORE there was a known backup method of DRM keys, so they're lost forever. I'm trying to find out if my problems are related to this. So far I ruled out:
- Recovery
- Rooted yes/no
- Unlocked/Relocked bootloader
- Different baseband versions

My only solution is to go home, reinstall baseband and all works fine again, till my phone decides to drop signal again. It's starting to drive me nuts. Any advice? And why can I only select 'USA Baseband' from the service menu?