Moga controller + 80mm fan = perfect cooling solution. topic

Got this idea from another guy over at Oculus Forum then put my own spin on it. Pretty simple and can probably use parts you have laying around the house:

1) Need a Moga Controller to power the fan (or one that has full USB out power port).
2) 80mm case fan.
3) USB cable.
4) Wire connectors (crimp style).
5) Pliers.
6) Double sided velcro tape.
7) Extra battery back for N4 (I just stopped by Sprint store and said I lost mine. They had an extra in the back and gave it to me).

So anyway, they make USB 80mm case fans but in case you don't have one and you have a normal one laying about, cut off the connector and expose the wires on only the red and black. Trim back any others. Do the same with a USB cable retaining the large male end. Using wire connectors (crimp style for snug connection since these wires are very thin), connect red to red and black to black. Once done wrap electrical tape around your entire connection.

Now cut 4 small velcro tape squares and place one on each corner of the 80 mm fan so that the air blows against the back on your N4 battery cover. Stick fan to cover.

Now just plug the USB cable into your Moga and game away. You can game for hours and phone will remain nice and cool with no warnings or shut downs.

** The guy at Oculus actually cut a hole in the GVR cover and attached his fan with screws. I didn't want to go that extreme so I did the velcro thing.

Here's a pic of my mod:



Good luck. Here's the original Oculus Forum thread if you wish to see the other mod (hat tip to steveelliss99).

https://forums.oculus.com/viewtopic.php?f=62&t=20753

Here's the cover mod:

[Q] ps3 controller in xperia topic

Hello, I have a xperia M and sp (sp is a brick for now :c) I am looking for someone who can carry the ability to use the dualshock in my xperia M, if you can please help, thanks in advance.
i have to used traductor, my english is bad :(: Llanto:

[Q] Mad Catz Mojo USB controller support topic

Hi all, I am insterested in the Mojo for console emulation. consoles like PSP, N64, GBA, Snes
etc. The thing is I don't want to use the C.T.R.L. controller that comes with the console, and
I want to use wired controllers instead.

I looked on google for answers and I found a page that gave a small handful of controllers
that work with the Mojo but all of those controllers seemed to be wireless. I have 2
controllers that I think I should mention.

-The first is a Buffalo Snes style controller. (just a regular usb controller)
-And the second one is actually an adapter for the Pc and Wii U, the Mayflash 4 port
Gamecube controller adapter.

Can I use these two usb devices on the Mojo and can I make it so that I never have to use
the C.T.R.L. controller?