Hi, I use Hangouts as my default SMS app. I have generated a long list of blocked numbers in time. Now I need to clean reset my phone and I don't want to lose my block list. Is there a way to backup that list? Thanks.
Affichage des articles dont le libellé est block. Afficher tous les articles
Affichage des articles dont le libellé est block. Afficher tous les articles
samedi 28 février 2015
lundi 23 février 2015
Undesactive block reactivation topic
Hi,
I have a serious problem on my S5 that will not let me use it to full functionality. In practice not let me off the block reactivation ... I enter the password but the check always returns green .. I tried with several reversals but not deactivated anyway. I can not bring it to service because in the past I ran the root ... I'm with the firmware Polish from December and since then only OTA updates ...
There is possibility to disable it? :(
I have a serious problem on my S5 that will not let me use it to full functionality. In practice not let me off the block reactivation ... I enter the password but the check always returns green .. I tried with several reversals but not deactivated anyway. I can not bring it to service because in the past I ran the root ... I'm with the firmware Polish from December and since then only OTA updates ...
There is possibility to disable it? :(
dimanche 22 février 2015
[Q] Camera Touch block Issue topic
Dear All,,
Device : Xperia Z2
ROM : existenZ ultimate 4
Here i requesting your assistance due to an error experienced by my device, Xperia Z2.
lately I use Z2 for under water photo, to be precise at Feb 20, 2015
Cronology:
1. Using phone under water for photo
2. activating touch block feature to prevent screen to be 'touched' by water
3. touch block's 'slide to deactivate' suddenly missing
4. until now I cannot touch my screen.
5. I do re-flash stock ftf file .167, but no changes, even in first use setup I cannot touch language selection.
If anyone have some clue to this issue, please tell me immediately.
Because I'm from Indonesia and Sony Service Center here is somewhat not satisfying.
Thank you.
Best Regards,
Amri
Device : Xperia Z2
ROM : existenZ ultimate 4
Here i requesting your assistance due to an error experienced by my device, Xperia Z2.
lately I use Z2 for under water photo, to be precise at Feb 20, 2015
Cronology:
1. Using phone under water for photo
2. activating touch block feature to prevent screen to be 'touched' by water
3. touch block's 'slide to deactivate' suddenly missing
4. until now I cannot touch my screen.
5. I do re-flash stock ftf file .167, but no changes, even in first use setup I cannot touch language selection.
If anyone have some clue to this issue, please tell me immediately.
Because I'm from Indonesia and Sony Service Center here is somewhat not satisfying.
Thank you.
Best Regards,
Amri
mercredi 11 février 2015
Install GApps -> Block their permissions? topic
Hello,
just curious if I am able to
a) block some permissions of the GApps
b)don't allow them to start on boot
c)run their services permanently
, when I'm going to install them on my device or are they digging so deep into the android system, that it isn't possible?
Thanks in advance.
Regards
just curious if I am able to
a) block some permissions of the GApps
b)don't allow them to start on boot
c)run their services permanently
, when I'm going to install them on my device or are they digging so deep into the android system, that it isn't possible?
Thanks in advance.
Regards
lundi 9 février 2015
[Q] [CM12] Surfaceflinger seems to block boot process topic
Hi,
I'm trying to port cm12 to htc one v, which doesn't have devs anymore, so I'm asking here.
The phone starts surfaceflinger and shows the bootanimation, then it does nothing:
I can kill surfaceflinger, and zygote starts, but then dex2oat fails.
This is my first android rom and I just wanna know how I may find the problem.
If you want, you can look at my device tree on github: https://github.com/AndroidPrimou/and...ee/cm-12.0-new, https://github.com/AndroidPrimou/and...ee/cm-12.0-new
Kernel: https://github.com/rastomanchik/andr...nel_htc_primou
Please help, I'm completely clueless :)
I'm trying to port cm12 to htc one v, which doesn't have devs anymore, so I'm asking here.
The phone starts surfaceflinger and shows the bootanimation, then it does nothing:
Code:
--------- beginning of main
I/lowmemorykiller( 1680): Using in-kernel low memory killer interface
I/cm ( 1696): ____ _ _ ____ _ _ ____ ____ ____ _ _ _ _ ____ ___
--------- beginning of system
I/Vold ( 1682): Vold 2.1 (the revenge) firing up
D/Vold ( 1682): Volume sdcard0 state changing -1 (Initializing) -> 0 (No-Media)
I/Cryptfs ( 1682): Check if PFE is activated on Boot
I/cm ( 1697): | \_/ |__| |\ | | | | __ |___ |\ | |\/| | | | \
E/Cryptfs ( 1682): Bad magic for real block device /dev/block/platform/msm_sdcc.2/by-num/p26
E/Cryptfs ( 1682): Error getting crypt footer and key
I/cm ( 1698): |___ | | | | \| |__| |__] |___ | \| | | |__| |__/
I/SurfaceFlinger( 1687): SurfaceFlinger is starting
I/cm ( 1701): Welcome to Android 5.0.2 / CyanogenMod-12-20150209-UNOFFICIAL-alpha_0.4-primou
I/SurfaceFlinger( 1687): SurfaceFlinger's main thread ready to run. Initializing graphics H/W...
D/libEGL ( 1687): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 1687): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 1687): loaded /system/lib/egl/libGLESv2_adreno200.so
D/Vold ( 1682): Volume sdcard0 state changing 0 (No-Media) -> 2 (Pending)
D/DirectVolume( 1682): DirectVolume::handlePartitionAdded -> MAJOR 179, MINOR 65, PARTN 1
D/Vold ( 1682): Volume sdcard0 state changing 2 (Pending) -> 1 (Idle-Unmounted)
I/Adreno200-EGL( 1687): <qeglDrvAPI_eglInitialize:269>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051_msm8960_JB_VANILLA_CL2997615_release_AU (CL2997615)
I/Adreno200-EGL( 1687): Build Date: 04/11/13 Thu
I/Adreno200-EGL( 1687): Local Branch:
I/Adreno200-EGL( 1687): Remote Branch: quic/mako_jb_mr1
I/Adreno200-EGL( 1687): Local Patches: NONE
I/Adreno200-EGL( 1687): Reconstruct Branch: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051 + NOTHING
I/gralloc ( 1687): using (fd=13)
I/gralloc ( 1687): id = msmfb40_0
I/gralloc ( 1687): xres = 480 px
I/gralloc ( 1687): yres = 800 px
I/gralloc ( 1687): xres_virtual = 480 px
I/gralloc ( 1687): yres_virtual = 2400 px
I/gralloc ( 1687): bpp = 32
I/gralloc ( 1687): r = 0:8
I/gralloc ( 1687): g = 8:8
I/gralloc ( 1687): b = 16:8
I/gralloc ( 1687): width = 52 mm (234.461533 dpi)
I/gralloc ( 1687): height = 88 mm (230.909088 dpi)
I/gralloc ( 1687): refresh rate = 52429280.00 Hz
D/CALCFPS ( 1687): DEBUG_CALC_FPS: 0
D/CALCFPS ( 1687): period: 10
D/CALCFPS ( 1687): ignorethresh_us: 500000
D/CALCFPS ( 1687): DEBUG_CALC_FPS: 0
D/CALCFPS ( 1687): period: 10
D/CALCFPS ( 1687): ignorethresh_us: 500000
E/SELinux ( 1681): avc: denied { add } for service=display.hwcservice scontext=u:r:surfaceflinger:s0 tcontext=u:object_r:system_server_service:s0 tclass=service_manager
I/Adreno200-C2D( 1687): <c2d_wrapper_init:126>: C2D2 initializing z180 version: libc2d2_z180.so
I/Adreno200-C2D( 1687): <c2d_wrapper_init:183>: C2D2 wrapper initialized successfully
I/hwcomposer( 1687): Initializing Qualcomm Hardware Composer
I/hwcomposer( 1687): MDP version: 400
I/hwcomposer( 1687): DYN composition threshold : 2.000000
I/hwcomposer( 1687): hwc_device_open: Faking Hardware VSYNC
I/SurfaceFlinger( 1687): Using composer version 1.0
I/hwcomposer( 1687): Initializing UEvent Listener Thread
I/hwcomposer( 1687): Initializing VSYNC Thread
W/SurfaceFlinger( 1687): no suitable EGLConfig found, trying a simpler query
I/SurfaceFlinger( 1687): EGL information:
I/SurfaceFlinger( 1687): vendor : Android
I/SurfaceFlinger( 1687): version : 1.4 Android META-EGL
I/SurfaceFlinger( 1687): extensions: EGL_KHR_get_all_proc_addresses EGL_ANDROID_presentation_time EGL_KHR_image EGL_KHR_image_base EGL_KHR_lock_surface EGL_KHR_gl_texture_2D_image EGL_KHR_gl_texture_cubemap_image EGL_KHR_gl_renderbuffer_image EGL_KHR_fence_sync EGL_EXT_create_context_robustness EGL_ANDROID_image_native_buffer EGL_ANDROID_recordable
I/SurfaceFlinger( 1687): Client API: OpenGL_ES
I/SurfaceFlinger( 1687): EGLSurface: 8-8-8-8, config=0x4
I/SurfaceFlinger( 1687): OpenGL ES informations:
I/SurfaceFlinger( 1687): vendor : Qualcomm
I/SurfaceFlinger( 1687): renderer : Adreno (TM) 205
I/SurfaceFlinger( 1687): version : OpenGL ES 2.0 V@6.0 AU@04.02.02.60.051 (CL@2997615)
I/SurfaceFlinger( 1687): extensions: GL_EXT_debug_marker GL_AMD_compressed_ATC_texture GL_AMD_performance_monitor GL_AMD_program_binary_Z400 GL_EXT_robustness GL_EXT_texture_format_BGRA8888 GL_EXT_texture_type_2_10_10_10_REV GL_NV_fence GL_OES_compressed_ETC1_RGB8_texture GL_OES_depth_texture GL_OES_depth24 GL_OES_EGL_image GL_OES_EGL_image_external GL_OES_element_index_uint GL_OES_fbo_render_mipmap GL_OES_fragment_precision_high GL_OES_get_program_binary GL_OES_packed_depth_stencil GL_OES_rgb8_rgba8 GL_OES_standard_derivatives GL_OES_texture_3D GL_OES_texture_float GL_OES_texture_half_float GL_OES_texture_half_float_linear GL_OES_texture_npot GL_OES_vertex_half_float GL_OES_vertex_type_10_10_10_2 GL_OES_vertex_array_object GL_QCOM_alpha_test GL_QCOM_binning_control GL_QCOM_driver_control GL_QCOM_perfmon_global_mode GL_QCOM_extended_get GL_QCOM_extended_get2 GL_QCOM_tiled_rendering GL_QCOM_writeonly_rendering GL_AMD_compressed_3DC_texture GL_EXT_texture_filter_anisotropic
I/SurfaceFlinger( 1687): GL_MAX_TEXTURE_SIZE = 4096
I/SurfaceFlinger( 1687): GL_MAX_VIEWPORT_DIMS = 4096
E/cutils-trace( 1687): Error opening trace file: No such file or directory (2)
D/SurfaceFlinger( 1687): Set power mode=2, type=0 flinger=0x40662000
D/SurfaceFlinger( 1687): SF. shader cache generated - 26 shaders in 684.494873 ms
D/libEGL ( 1787): loaded /system/lib/egl/libEGL_adreno200.so
D/libEGL ( 1787): loaded /system/lib/egl/libGLESv1_CM_adreno200.so
D/libEGL ( 1787): loaded /system/lib/egl/libGLESv2_adreno200.so
I/Adreno200-EGL( 1787): <qeglDrvAPI_eglInitialize:269>: EGL 1.4 QUALCOMM build: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051_msm8960_JB_VANILLA_CL2997615_release_AU (CL2997615)
I/Adreno200-EGL( 1787): Build Date: 04/11/13 Thu
I/Adreno200-EGL( 1787): Local Branch:
I/Adreno200-EGL( 1787): Remote Branch: quic/mako_jb_mr1
I/Adreno200-EGL( 1787): Local Patches: NONE
I/Adreno200-EGL( 1787): Reconstruct Branch: AU_LINUX_ANDROID_JB_VANILLA.04.02.02.60.051 + NOTHING
E/cutils-trace( 1787): Error opening trace file: No such file or directory (2)
E/BootAnimation( 1787): couldn't find audio_conf.txt
W/BootAnimation( 1787): Audio service is not initiated.
D/BootAnimation( 1787): Use save memory method, maybe small fps in actual.
D/BootAnimation( 1787): Use save memory method, maybe small fps in actual.
This is my first android rom and I just wanna know how I may find the problem.
If you want, you can look at my device tree on github: https://github.com/AndroidPrimou/and...ee/cm-12.0-new, https://github.com/AndroidPrimou/and...ee/cm-12.0-new
Kernel: https://github.com/rastomanchik/andr...nel_htc_primou
Please help, I'm completely clueless :)
Inscription à :
Articles (Atom)